Pit Frame – 48”x60”-1K/20K

$925.00

Pit Frame for low profile floor scales.

Description

Pit Frame for low profile floor scales. *Other sizes and capacities available, please call for quote. Stainless available, please call for quote. Easy to install, position in place and pour concrete. Built in concrete anchors ensure solid installation. Foot retainers hold scale in place.

Pit openings should be 10” longer and wider than the actual scale base dimensions. This allows for proper pit frame installation. Pit depth at 5” allows for proper leveling of frame for import and domestic scale 1k-10k bases. Depth for 20k domestic should be 6.5”.

*RECOMMENDED SLOPE FOR FLOOR DRAIN, IF INSTALLED, IS ½” PER FOOT.
*LOAD CELL CONDUIT SHOULD BE AT LEAST ½” AND LOCATED AT J-BOX END OF PIT.

1.) EXCAVATE PIT OPENING ACCORDING TO SIZES SUPPLIED.

2.) SUSPEND FRAME OVER OPENING WITH BOARDS AND WIRE. LEVEL TO -0- DEGREE, NO ERROR IS ACCEPTABLE.

3.) FLOAT CONCRETE TO BOTTOM OF CORNER BASE PLATES, TROWEL CONCRETE AROUND FRAME AND LEVEL WITH FLOOR.

4.) PROVIDE DRAINAGE IS NECESSARY.

5.) PROVIDE CONDUIT TO EXIT SCALE CABLE FROM PIT TO WALL.

6.) WAIT MINIMUM OF 24 HOURS FOR CONCRETE TO SET UP AND CURE.

7.) DROP SCALE INTO PIT TO CHECK LEVEL. ADJUST SCALE FEET UP OR DOWN TO MAKE DECK AND FLOOR THE SAME HEIGHT FOR A SMOOTH APPROACH. PULL

LEAD CABLE INTO CONDUIT DURING FINAL POSITIONING OF THE SCALE BASE.

8.) SCALE SHOULD BE ON SAME PLANE AS PIT COPING AND SHOULD HAVE APPROXIMATLY 3/8” CLEARANCE ALL AROUND.

Downloads